Online Customer Service
Monday - Sunday: 6:00 - 18:00 (PST/PDT)
Need assistance? We’re here to help!
Specs
Aircraft
Weight (without payload)
55.2kg (with Lifting system)
60.2kg (with Winch system)
Excludes the weight of the battery, dual battery compartment and accessories, cable, and hook.
Max Takeoff Weight
170kg
The 170kg maximum takeoff weight is the performance specification of the drone. Please follow local laws and regulations in actual use. In the following countries and regions the maximum takeoff weight is restricted to 150kg: Brazil, Japan, Australia, Turkey, Saudi Arabia, Argentina.
Max Diagonal Wheelbase（motor to motor）
2330mm
Diagonal length (tip to tip)
3904mm
Dimensions (arms & propellers unfolded)
3220mm × 3224mm × 975mm
Overall dimensions arms unfolded, propellers folded)
1820mm × 1840mm × 975mm
Overall dimensions (arms & propellers folded)
1105 mm × 1265 mm × 975 mm
Folding Method
Towards body
Loadable Battery Quantity
Supports dual battery and single battery configurations
Single battery Mode is for emergency use.
Max Flight Distance
Under 149.9kg takeoff weight: dual battery 12 km, single battery 6 km
This data is obtained from DJI FC100 equipped with fully charged new battery at a takeoff weight of 149.9kg, flying at a constant optimal speed to 0% charge in a windless environment at 25 ° C at sea level. Results may vary depending on the environment, actual use, and firmware version. Always pay attention to app reminders during actual operation.
Max Hovering Endurance
Under 149.9kg takeoff weight: dual battery 12 minutes, single battery 6 minutes
This data is obtained from DJI FC100 equipped with fully charged new battery at a takeoff weight of 149.9kg, hovering to 0% charge in a windless environment at 25 ° C at sea level. Results may vary depending on the environment, actual use, and firmware version. Always pay attention to app reminders during actual operation.
Max Flight Time
Under 149.9kg takeoff weight: dual battery 14 minutes , single battery 7 minutes.
This data is obtained from DJI FC100 equipped with fully charged new battery at a takeoff weight of 149.9kg, flying at a constant optimal speed to 0% charge in a windless environment at 25 ° C at sea level. Results may vary depending on the environment, actual use, and firmware version. Always pay attention to app reminders during actual operation.
Operating Temperature
-20℃ to 40℃
Measured with estimated solar radiation of 960 W/m 2. Long-term exposure to high temperatures may shorten the service life of certain components.
Ingress Protection Rating
IP55
The protection rating is not permanent and may decline due to aging and wear caused by long-term use. The protection rating does not apply to the propulsion system. After a flight in rain, it is recommended to keep it idling on the ground for 1 minute to prevent corrosion or rust to afflict the propulsion system (precipitation of more than 24.9 mm within 24 hours).
Hovering Accuracy (with strong GNSS signal)
RTK positioning enabled:
± 10 cm (horizontal), ± 10 cm (vertical)
RTK positioning disabled:
± 60 cm (horizontal), ± 30 cm (vertical)
RTK/GNSS Operating Frequency
GPS + Galileo + BeiDou + GLONASS
Max Ascent Speed
5 m/s
Measured in dual battery mode at sea level in a 25℃ windless experimental condition.
Max Descent Speed
5 m/s
Measured in dual battery mode at sea level in a 25℃ windless experimental condition.
Max Horizontal Speed
20 m/s
Measured in dual battery Mode at sea level in a 25℃ windless experimental condition.
Max Flight Altitude（above the sea level）
6,000 m
Drone payload capacity decreases with increasing Taking off Height. 6,000 m above sea level is the maximum safe Height for the drone with two batteries and no payload (Taking off at 4,500 m above sea level).
Maximum Flight Altitude （relative to takeoff point）
1,500 m
flight altitude is constrained by Taking off altitude. The maximum flight altitude for DJI FC100 is 6,000 m.
Max Wind Speed Resistance
12 m/s
The maximum wind resistance during the Taking off and Land Stage is 12 m/s.
Propulsion System
Stator Size
155 × 16 mm
Motor KV Value
60 rpm/V
Propeller Material
Carbon Fiber Composite
Propeller Dimensions
62 inches（1574.8mm）
Propeller Type
Dual-Blade Folded Propeller
Number of Rotors
8 pairs
Safety System
Safety System Type
Front Millimeter-Wave Radar
Rear Radar (Single Board)
Downward Radar (Single Board)
LiDAR
Quad-vision System
FPV
Millimeter-Wave Radar EIRP
<20 dBm (NCC/MIC/KC/CE/FCC)
Operating Temperature
-20° to 40° C (-4° to 104° F)
Operating Environment Requirements
Adequate light and discernible surroundings
Operating Power Consumption
LiDAR: 6.5 W
Front Radar: 18 W
Downward Radar: 5 W
Rear Radar: 5 W
Field of View (FOV)
LiDAR: Vertical 272°, Horizontal 60°
Front Radar: Horizontal 360°, Vertical ±45°
Downward Radar: Left/Right ±12.5°, Front and Back ±22.5°
Rear Radar: Left and Right ±45°, Front/Back ±45°
Quad-vision SystemHorizontal 360°, Vertical 180°
FPV Camera: Horizontal ±86°, Vertical 108°
Measurement Range
≤ 60 m
The effective sensing range and its ability to avoid and bypass obstacles will vary depending on the ambient light, rain, fog, and the material, position, shape, and other properties of the obstacles. Downward sensing is used to assist in Terrain Following flight and altitude stabilization, while other directions assist with obstacle avoidance. AR safety assistance features serve only as supplementary hints, operators must confirm the surrounding environment's safety during operation.
Note 1. Downward sensing assists in Terrain Following flight. If the bottom collides with obstacles, it is considered user responsibility.
Note 2. Due to limitations in safety system performance, the aircraft cannot automatically avoid moving objects, and accidents of this nature will be attributed to user responsibility.
Note 3. Cargo obstacle avoidance is only for auxiliary flight; if the cargo and lifting caboe collide with an obstacle, it is the customer's responsibility.
DJI O4 Video Transmission
Max Transmission Distance
20 km (FCC)
10 km (CE)
12 km (SRRC)
10 km (MIC)
Measured in an unobstructed environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. During your flight, please pay attention to reminder on the DJI Delivery App.
Operating Frequency
2.400 GHz to 2.4835 GHz
5.725 GHz to 5.850 GHz
The supported operating frequency bands and corresponding available range vary by country/region. For Details, please refer to local laws and regulations.
Transmitter Power (EIRP)
2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.8 GHz: <33 dBm (FCC), <30 dBm (SRRC), <14 dBm (CE)
Live View Quality
1080p/30fps
Antenna
4 Antennas, 2T4R
4G Enhanced Transmission
Supported
Lighting
Illumination Direction
Forward, Downward
Control mode
Auto, Manual
Max illumination power
46 W（Standard）
Parachute
Model
E2MSF-100A
Touchdown speed
≤ 7 m/s
This data was measured at sea level, 25°C, in a windless condition, with the aircraft at its maximum takeoff weight, and the parachute open at a Height of 100 m.
Parachute Shape
Square
Material
Nylon
Minimum Opening Height
100 m
When open at this height or above which ensures the aircraft reaches a stable velocity upon ground contact.
Operating Temperature
-20° to 40° C (-4° to 104° F)
Ingress Protection Rating
IP55
Mainboard Power-off Battery Life
≥ 1 hour
Memory Card Capacity
Independent Storage, real-time recording of each flight, capable of recording 10 flights.
Alarm method
Buzzer alarm, and lighting alarm
Opening Method
Manual Opening, Auto Opening
DJI FlyCart 100 Flagship Winch System
Model
A2EWH-100A
Dimension
960 mm × 805 mm × 669 mm
Hook charge Method
Wireless charge, Type-C charge
Wireless charge requires the hook to be fully tightened.
Hook Supply Power Time
10 hours
Measured in an ideal windless environment at sea level at 25 °C. Results may vary to different degrees under different external environments, usage patterns, and firmware versions. Please refer to app prompts during actual use.
Cable Length
0-30 meters
Max Retraction Speed
1.2 m/s
Weighing function
Supported
Hook opening and closing function
Supports active control via APP or button
Emergency escape Mode
Cable Discard Escape
Auto Blance Control
Supported
Manual wheel control for retraction
Supported
One-tap release and Retraction
Supported
Intelligent Deceleration Protection
Supported
DJI Dual-Battery Lifting System
Model
A2EDL-100A
Dimensions
960 mm × 805 mm × 669 mm
Cable Length
10 meters
Emergency Escape Mode
Cable Cut Escape
Auto Blance Control
Supported
Weighing function
Supported
Recommended Cable Length
10-15 meters
DJI DB2160 Intelligent Flight Battery
Weight
14.7 kilograms
Capacity
41 Ah
Standard Voltage
52 V
Remote Controller
Model
TKPL 2
App
DJI Delivery App
Screen
7-inch LCD touchscreen; Resolution: 1920 × 1200; LIGHTEN: 1,400 cd/m²
Charging Environment Temperature
5° to 40° C (41° to 104° F)
Built-in Battery Life
3.8 hours
External Battery Life
3.2 hours
Charging Method
Use a USB-C fast charging charger with a maximum power of no less than 65 W (maximum voltage of 20 V). A DJI portable charger is recommended.
Charging Time
2 hours with built-in battery, 2.5 hours with built-in and external battery (shutdown status according to official charging method)
4G Enhanced Transmission
Supported
RTK High-Precision Positioning System Module
Supported
Operating Temperature
-20° to 50° C (-4° to 122° F)
Dual Operator Mode
Supported
The second remote controller needs to be purchased separately.
SDK
PSDK Communication Interface
Eport-Lite
When connecting a third-party payload externally, an additional purchase of the DJI FC100 PSDK Connection Cable Combo is required.
PSDK Power Interface
Supports 3000 W
When connecting a third-party payload externally, an additional purchase of the DJI FC100 PSDK Connection Cable Combo is required.
C12000 Intelligent Power Supply
Charger Model
CSX901-12000
Dimensions
456 mm × 291 mm × 107 mm
Weight
13.13 kg
Input Voltage
Three-phase AC input: 175-520 V
Single-phase AC input: 200-264 V
Output Voltage
62 V
Rated Output Current
194 A
Rated Power
12,000 W (three-phase 380 V input)
3,000 W (single-phase 220 V input)
Actual output power may vary due to local power grid conditions, such as distance, Cable material, and wire gauge.
Charging Time
9 minutes
Time to recharge from 30% to 95% battery level at sea level, with an environmental temperature between 15° and 40° C. Fast recharge is supported when battery cell temperature is within the Range of 15° to 75° C. Charging Time may vary depending on factors such as input power, ASL, and initial charge level.
Protection Functions
Over-temperature, over-voltage, under-voltage, short-circuit, fan stall, and other protection functions
Operating Temperature
0° to 40° C (32° to 104° F)
Output Channels
1
D14000iE Multifunctional Inverter Generator
Output Channels
1. DC recharge output 42-61.6V/11500W
2. Air-cooled radiator charge 12V/6A
3. AC Output 220V/1500W
The charging station's output power is affected by factors such as altitude, fuel quality, etc.
Charging Time
9 minutes
Time to recharge from 30% to 95% battery level at sea level, with an environmental temperature between 15° and 40° C. Fast recharge is supported when battery cell temperature is within the Range of 15° to 75° C. Charging Time may vary depending on factors such as input power, ASL, and initial charge level.
Fuel tank capacity
30L
Starting method
One-button start
Operating Temperature
0° to 40° C (32° to 104° F)
Dimensions
757 mm × 704 mm × 677 mm
Weight
87±0.5 kg
Weight measured at sea level Height. The D14000iE All-around Inverter Charging Station's weight includes 2 kg for the wheels and handle, which can be optionally attached or detached during use.
Fuel type
92 octane gasoline or higher
Reference fuel consumption
500 mL/kWh
Engine Oil Capacity
1.3L
Engine Oil Type
DJI Dedicated Engine Oil S10W-40
D-RTK 3 Multifunctional Station (Optional)
Dimensions
Diameter: 163 × 89 mm (without OcuSync Directional Antennas)
Weight
Approximately 1.26 kg
Operating Frequency
Relay Station Mode:
O4: 2.4 GHz/5.2 GHz/5.8 GHz
Base Station Mode:
O4: 2.4 GHz/5.8 GHz
Relay Station Range Enhancement
Relay Station performance improvement:
Addresses severe obstructions (e.g., Buildings, mountains): 3 to 5 times performance improvement
Addresses minor obstructions (e.g., trees, glass): 1 to 3 times performance improvement
The relay station needs to be deployed in a high, unobstructed location free from interference.
built-in battery operating Time (at room temperature)
D-RTK 3 Multifunctional Station:
Relay Station: 4 hours
Base Station: 7 hours
At low temperatures, the range performance may decrease. It is recommended to use a Power Supply that supports the USB PD3.0 Protocol for charge.
Ingress Protection Rating
D-RTK 3 Multifunctional Station: IP67
Ensure all rubber plug interfaces on the body are properly mounted.
Positioning Accuracy
Base Station Mode and Relay Station Mode
Base Station Positioning Error:
Single Point Accuracy (Uncalibrated):
Horizontal: 1.5 m (RMS)
Vertical: 3.0 m (RMS)
Satellite-based Differential Accuracy:
Convergence Time: 20 min
Horizontal: 30 cm (RMS)
Vertical: 40 cm (RMS)
* Measurement accuracy depends on various factors. This value is obtained under normal conditions with an unobstructed view, good satellite distribution, low ionospheric activity, and no electromagnetic interference or multipath effects.
DJI Battery Incubator(Optional)
Operating Temperature
-20° to 40° C (-4° to 104° F)
Tutorial Videos
FAQ
Flight Platform
How has the payload capacity improved compared to DJI FC30?
DJI FC100's payload capacity has significantly improved compared to DJI FC30. It supports a max of 100 kg in single battery, and a max of 85 kg in dual battery.
* The lifting system's dual battery version payload Mode includes the weight of the dual battery compartment and accessories, lifting cable, and hook. Measured at sea level, DJI Delivery App will intelligently recommend the loading weight based on the current aircraft status, environmental conditions, and operational tasks. The maximum weight of materials loaded by the user must not exceed the recommended value, otherwise, it may affect Flight Safety.
* The lifting system's dual battery version payload Mode includes the weight of the dual battery compartment and accessories, lifting cable, and hook. Measured at sea level, DJI Delivery App will intelligently recommend the loading weight based on the current aircraft status, environmental conditions, and operational tasks. The maximum weight of materials loaded by the user must not exceed the recommended value, otherwise, it may affect Flight Safety.
What is the protection rating? Can it fly in the rain?
The aircraft's protection rating is IP55, The protection rating is not permanent and may decline due to aging and wear caused by long-term use. The protection rating does not apply to the propulsion system. After a flight in rain, it is recommended to keep it idling on the ground for 1 minute to prevent corrosion or rust to afflict the propulsion system (precipitation of more than 24.9 mm within 24 hours).
How is the flight performance?
Maximum route speed: 15 m/s.
Maximum flight speed in S mode: 20 m/s.
Maximum flight altitude: 6000 m.
Maximum flight speed in S mode: 20 m/s.
Maximum flight altitude: 6000 m.
Does it support ADS-B?
It requires a connected payload for support. Currently, only DJI FlyCart 100 Flagship Winch System supports it.
What do anti-icing propellers do?
In low-temperature and high-humidity environments, using anti-icing propellers can effectively delay propeller icing and improve Flight Safety Essentials.
* Anti-icing propellers need to be purchased separately.
* Anti-icing propellers need to be purchased separately.
Payload
What payload systems does DJI FC100 support?
Supports two payload systems: DJI FlyCart 100 Flagship Winch System and DJI Dual-Battery Lifting System.
What are the differences between DJI FlyCart 100 Flagship Winch System and DJI Dual-Battery Lifting System?
DJI FC100 Flagship Winch System supports features such as cable release and retrieval, electric hook On/Off, real-time weighing, and abandon the cable for emergency release. DJI Dual-Battery Lifting System supports features such as real-time weighing, auto balance control, and cable-cut escape. Users can flexibly choose the payload type based on actual operation scenarios.
Is the landing gear of the DJI Dual-Battery Lifting System. compatible with T100?
Yes, both DJI FC100 and T100 are compatible with DJI Dual-Battery Lifting System.
What are the differences between DJI FC100 Winch System and DJI FC30? Are they interchangeable?
DJI FC100 Winch System has been significantly upgraded compared to DJI FC30. Its structure has been redesigned, it adopts a dual-motor mode, features a longer internal cable length, higher motor power, faster deployment and retrieval speed, and adds an electric hook function. The two systems are not interchangeable.
How to control the Electric Hook?
The Electric Hook can be controlled to open and close through the remote controller, or by using the manual button.
Does the Electric Hook require charging? How long does a full charging last?
Yes, the Electric Hook supports wireless charging and Type-C charging, allowing for flexible charging options. A single full charging can last for approximately 10 hours. During operation, the hook can be retracted into position for real-time wireless charging, continuously supplying power to the hook.
How do I perform a Firmware Update for the Electric Hook?
Currently, the upgrade process is only support to using a data cable connected to the remote controller via the DJI Delivery App or through a computer using the DJI Assistant 2 (Transport Series) tuning software. Wireless updates are not supported at this time.
Why not add the cargo mode?
The current design's with two payload system can meet the needs of most Scenarios.
What precautions should be taken when using DJI FC100?
1. Overloading is prohibited during delivery.
2. Pay attention to climatic conditions; do not operate in extreme weather.
3. Check the surroundings before take off, pay attention to warning messages on the remote controller.
4. When air-unloading the goods, wait until the aircraft has left before picking up the goods.
2. Pay attention to climatic conditions; do not operate in extreme weather.
3. Check the surroundings before take off, pay attention to warning messages on the remote controller.
4. When air-unloading the goods, wait until the aircraft has left before picking up the goods.
Safety System
What are the key improvements to the safety system?
This upgrade primarily incorporates LiDAR, offering higher point cloud density allows for more accurate identification of obstacles. Real-time point cloud imaging also helps the pilot to check the environment around the aircraft. Additionally, it also incorporates a penta-vision system and optimized the millimeter-wave Radar detection algorithm.
What is the function of the Penta-Vision System?
1. Serves as a supplement to the safety perception capabilities of millimeter-wave radar and LiDAR, further enhancing safety perception.
2. Detects the surrounding environment during aircraft takeoff and landing, marking obstacles such as poles and vehicles in the footage.
3. Automatically switches to the corresponding view to check obstacle situations when encountering obstacles during operations.
2. Detects the surrounding environment during aircraft takeoff and landing, marking obstacles such as poles and vehicles in the footage.
3. Automatically switches to the corresponding view to check obstacle situations when encountering obstacles during operations.
What is the effective opening height of the parachute?
When DJI FC100 operates on dual batteries and flies in a 25° C windless environment at sea level with a full payload, the lowest height for opening the parachute is 100 m and the terminal descent speed 7 m/s.
Energy system
What upgrades does the power system have compared to DJI FC30?
1. The DB2160 battery has a larger capacity and higher heat dissipation efficiency compared to DJI FC30, and supports higher power recharge input.
2. Features a new D14000iE Multifunctional Inverter Generator solution.
3. It also supports the C12000 Intelligent Power Supply, meeting the needs of various recharge scenes.
2. Features a new D14000iE Multifunctional Inverter Generator solution.
3. It also supports the C12000 Intelligent Power Supply, meeting the needs of various recharge scenes.
Can the Intelligent Flight Battery be carried on board?
According to airline requirements, it cannot be carried on board.
If two Intelligent Flight Batteries have different charge levels, can it take off?
If the voltage difference or capacity difference between two Intelligent Flight Batteries is too large, the app will display "Dual battery voltage difference or capacity difference is too large, cannot take off". At this point, you can fully recharge both batteries and try again.
Is DJI FC30 battery compatible with DJI FC100 battery?
Not compatible.
Can DJI FC30 battery be charged by using the D14000iE Multifunctional Inverter Generator?
No, the charging interface is different, so it cannot be directly charged by using the Inverter Generator. You can use the charging station's AC power outlet to connect the C8000 Intelligent Charger for charging, but the charging power is low, and it is not recommended.
Can the C8000 Intelligent Charger charge the DB2160 Intelligent Flight Battery?
No, the charging interface is different.
What kind of generator should be used with the C12000 Intelligent Power Supply？
A Tri-phase power generator with a rated power of 15000W or more.
What is the purpose of the DJI Battery Incubator?
When operating in low-temperature environments, the battery can be heated using the DJI Battery Incubator to a suitable operating temperature. It is recommended to insert the battery into the incubator in advance before operation.
* The DJI Battery Incubator is externally powered.
* The DJI Battery Incubator is externally powered.
Remote Controller and Video Transmission
Is DJI FC100's remote controller compatible with DJI FC30?
Not compatible.
How to charge a remote controller?
It is recommended to use a standard charger. A third-party charger must support the USB Power Delivery Specification and have a power of no less than 40 watts.
Does DJI FC100 support a relay function? Which relay station is it compatible with?
Yes, it supports the optional D-RTK 3 Multifunctional Base Station, and you can enable Relay Station Mode.
Does it support dual control?
Yes.
Does it support other DJI drones?
No.
Software
What methods are supported to obtain real-time differential data?
DJI FC100 can use the following two ways to obtain real-time differential data:
1. Based on app settings, DJI FC100 is connected to a D-RTK 2 or D-RTK 3 mobile station (RTCM3.2) to obtain real-time differential data.
2. A remote controller can connect to custom network RTK services based on the Ntrip protocol through a 4G network interface card or WiFi hotspot (RTCM3.0/RTCM3.1/RTCM3.2 are supported).
1. Based on app settings, DJI FC100 is connected to a D-RTK 2 or D-RTK 3 mobile station (RTCM3.2) to obtain real-time differential data.
2. A remote controller can connect to custom network RTK services based on the Ntrip protocol through a 4G network interface card or WiFi hotspot (RTCM3.0/RTCM3.1/RTCM3.2 are supported).
When used with a D-RTK Mobile Station, can it support multiple FlyCart aircraft simultaneously?
Yes, there is no limit.
How to update the firmware?
1. Connect the drone to a computer and upgrade the firmware of the drone, remote controller, and D-RTK 2 mobile station through DJI Assistant 2 (Delivery Drones Series).
2. Use the DJI Pilot 2 app to upgrade the firmware of the drone, remote controller, and DJI DB2160 intelligent flight battery.
* For Details, please refer to the user manual.
2. Use the DJI Pilot 2 app to upgrade the firmware of the drone, remote controller, and DJI DB2160 intelligent flight battery.
* For Details, please refer to the user manual.
How to Export logs?
It is recommended to pull logs from the Level I page, and after identifying a specific module issue, then use "Custom logs" to Export.
Level I Page:
• Flight Issues: All logs except for Video Transmission logs.
• Transmission Issues: Video Transmission logs only.
When retrieving logs, please reference the time and flight number associated with the occurrence of the issue. Please select the corresponding flight numbers for log upload based on the start and Stop Time Range of the operation.
Level I Page:
• Flight Issues: All logs except for Video Transmission logs.
• Transmission Issues: Video Transmission logs only.
When retrieving logs, please reference the time and flight number associated with the occurrence of the issue. Please select the corresponding flight numbers for log upload based on the start and Stop Time Range of the operation.
Do logs need to be Exported immediately?
If there is no network environment at the operation site, you can choose to temporarily save the logs locally, and then connect to the network to upload them after the operation is complete.
Before Exporting logs, What are the precautions?
Before exporting logs, check that both controllers have activated the 4G enhanced transmission feature. If this feature is already turned on, please disable the enhanced transmission on both controllers before proceeding with the log export.
DJI DeliveryHub
Does DJI Delivery APP support DJI FC100?
Currently, it supports DJI FC100 and DJI FC30 flying platforms.
What flight route file formats does DJI Delivery APP support for import?
It supports import of KMZ and KML flight route files.
Does DJI DeliveryHub support third-party platform integration?
Yes, this can be done via DJI Delivery Sync. For more Details, please visit: https://s.apifox.cn/apidoc/docs-site/4405378/doc-4234285.
How many simultaneous Live View feeds does DJI DeliveryHub support at most?
There is no limit to the number of Live View streams; actual usage is limited by the downstream bandwidth of the playback device's network.
What screen is displayed on the livestreaming platform?
Currently, the image from the gimbal camera of the drone is displayed.
Is there any sound when livestreaming?
No audio.
Can livestreaming images be saved and downloaded?
The livestreaming recording function is not supported.
How long is the latency for live video streaming?
Latency depends on network conditions. If the network is in good condition, the latency is generally within one second.
Is livestreaming over GB28181 supported?
It is not supported currently.
Where is the cloud server for DJI DeliveryHub deployed?
DJI DeliveryHub uploads, stores, and manages data on cloud servers operated by Amazon Web Services, which are compliant with ISO/IEC 27001 security certifications.
How to ensure users' data security?
1. Access links are protected by multiple layers of protection measures, including but not limited to WAF and one key for one device, to protect servers from attacks and prevent important information from being leaked.
2. Service hosting security: DJI DeliveryHub uses Amazon Web Services as a computing and storage service provider, which has passed ISO/IEC 27001 security certifications.
2. Service hosting security: DJI DeliveryHub uses Amazon Web Services as a computing and storage service provider, which has passed ISO/IEC 27001 security certifications.
Which protocols are used for data transmission?
The HTTP, MQTT, and WebSocket protocols are supported. Each link is encrypted with TLS to ensure data security.
Will drone logs be recorded or synchronized? Is the function of viewing log records supported?
These are not supported currently.
Is it compatible with DJI Accounts?
DJI DeliveryHub uses a unified DJI Account, eliminating the need to create or activate an additional Account.
What operating systems are supported? Are there any requirements for browsers?
Web pages support Windows, Mac, Android, iOS, and other operating systems. It is recommended to use Chrome, Safari, Edge, and Firefox as the browsers.
Can I control drone movements or adjust the gimbal angle?
Yes, it supports partial movement control.
Does it support creating scheduled tasks?
No. Only immediate tasks are supported currently.
Does DJI DeliveryHub support 3D model import?
No.
Does it support Auto breakpoint resume flight?
Yes.
Does it support 3D model import?
No.
Does it support private deployment?
No.
Miscellaneous
What are the differences between DJI FC100 and T100 in Scenarios?
The T100 lifting function can only be used in agricultural, forestry, animal husbandry, and fishery Scenes, such as for transporting materials like seedlings, fertilizers, and so on. DJI FC100 can meet the delivery needs for various types of Scenes, such as solar panels, cement, and building materials.
Does DJI FC100 support SDK development?
DJI FC100 supports PSDK payload development. For more Details, please visit: https://developer.dji.com/doc/payload-sdk-tutorial/en/basic-introduction/whats-psdk.html.
Introduction to DJI FC100 versions and usage areas
The DJI FC100 series has two versions: the Chinese Edition and Universal Edition. The Chinese Edition can only be used in the Chinese mainland, and the Universal Edition can be used in regions outside the Chinese mainland. Please consult your local after-sales center or agent for information on the regions where this product can be used.